This website uses cookies in order to improve user experience.If you close this box or continue browsing,you accept this policy.For more information about the cookies we use or to find out how you can disabled cookies,click here.

Aztech Wall-Plugged Wireless-N 300Mbps High-Speed AP Ergonomically designed with built-in power adapter, it’s a perfect travel companion for any road war.. Product #: WL576E

WL576E

Aztech Wall-Plugged Wireless-N 300Mbps High-Speed AP

Ergonomically designed with built-in power adapter, it’s a perfect travel companion for any road warrior to enjoy mutliple devices connection wirelessly with a wired internet connection provided.

Key Features:

  • Wireless-N Data transfer rate up to 300Mbps
  • Eliminates the use of cable wires
  • Smart MIMO Technology
  • Wi-Fi Protected Setup (WPS)
  • Connects to multiple networking devices



SHOP NOW:


In-stores Availability:




 

 

A Portable Wireless-N Access Point for multiple networking devices internet connection 

Aztech WL576 is equipped with 1 x 10/100M Auto MDI/MDIx LAN port that can be used to connect to an existing wired network to serve as a wireless interface. It can also be used to configure the WL576E via its web-based GUI, or upgrade the firmware.

Portable without the Need of External Power Supply

The device is easy to setup. It is portable with no need of any external power adaptor. It comes with the embedded power supply and power plug, so that users can just plug the device into a power socket.

Safe and Secure

With multiple security encryptions and built-in firewall, Aztech GR7000 protects user's Wi-Fi networks against Internet intruders

Fuss-free Set-up with WPS

Aztech WL886RT4 supports Wi-Fi Protected Setup (WPS) that allows users to connect to their network simply by pressing the WPS button located at the bottom of the product.

Smart MIMO Technology

The device is designed with MIMO technology, which successfully reduces 'dead spot', and extends network coverage within a home or in the building.

 

Warranty Information
* 2 years

Protocol/Standards/Support

  • Wireless IEEE802.11n 
  • Wireless IEEE802.11b/g 
  • Ethernet IEEE 802.3 10/100
  • Ethernet IEEE802.3u
  • Ethernet IEEE802.3ab

Network Support

  • OFDM 1024
  • OFDM 256
  • OFDM 64
  • OFDM 16
  • OFDM 8 QAM
  • QPSK
  • BPSK
  • ROBO
  • IEEE802.11n: BPSK, QPSK, QAM-16, QAM-64
  • IEEE802.11g: BPSK, QPSK, QAM-16, QAM-64
  • IEEE802.11b: CCK, QPSK, BPSK

Wireless Frequency Band

  • Europe (ETSI): 2.412GHz ~ 2.742GHz (CH1 ~ CH13)

Security Support

  • Wireless: 64/128-bit WEP, WPA, WPA2

Hardware

  • Key Chipset: Ralink RT3052 Network Processor + WLAN Controller
  • SPI FlashRom: 4M Byte (Default), 8M Byte (Option)
  • SDRAM: 16M Byte

Platform Support

  • OS Independent with TCP/IP protocol installed

Power requirements

  • Supply voltage range: 100VAC – 240VAC (50/60 Hz)
  • Power Consumption : Less than 4W
  • Max Current : 0.12A

LED Indicators

  • 1 x Power (Green)
  • 1 x Ethernel (Green)
  • 1 x Wireless on/off (Green)
  • 1 x WPS button and LED (Green)

External Connectors

  • 1 x RJ45 for 10/100Base-T LAN
  • 1 x Factory Default Reset Button
  • 2 x Internal antennas

Dimension

  • 105(L) x 58 (W) x 42 (H) mm

Weight

  • 160g

Regulatory Approvals

  • Europe : CE, CB
  • Asia Pacific/ Europe : CE, IDA

Temperature

  • Operating : 0° to 40° Celsius(32° to 104° Fahrenheit)
  • Non-Operating : -25° to 70° Celsius(-13° to 158° Fahrenheit)

Humidity

  • Operating : 30% to 90% Relative Humidity (Non-Condensing)
  • Non-Operating : 30% to 95% Relative Humidity (Non-Condensing)
FirmwareDocumentations
Notes:

1. Please DO NOT upgrade your device over wireless connection.

2. If the unit is working properly with the existing firmware, do not upgrade.

3. Firmware release depends from country to country, download the firmware only if you're living in the country/region.