Aztech HomePlug AV 200Mbps Single-Band Wireless-N 300Mbps Extender Embarking on a concept of No New Wires® data communications, Aztech HL110EW transforms your in-house.. Product #: HL110EW

HL110EW

Aztech HomePlug AV 200Mbps Single-Band Wireless-N 300Mbps Extender

Embarking on a concept of No New Wires® data communications, Aztech HL110EW transforms your in-house powerline into wired and wireless networking infrastructure. Thus it successfully reduces "dead spot" and increases network coverage within your home.

Key Features:

  • Data transfer rate up to 200Mbps
  • Wireless-N 300Mbps
  • Best use with Fibre Broadband
  • 2-Port Ethernet Adapter
  • Plug and Play

Where to buy:


A Portable Wireless-N HomePlug In Any Power Outlet in Any Home, Office or Hotspot

Aztech HL110EW, 2-port Ethernet 200Mbps HomePlug AV Wireless-N Extender, provides wireless access to a network and extends it to any location in the home or office, eliminating disruptions due to unstable, weak wireless signals or blind spots. By plugging Aztech HL110EW to a favoured power outlet with Aztech HL110E, 200Mbps HomePlug AV connected to a broadband router, Aztech HL110EW reaches out to your notebook seamlessly, enabling you to continue to stream and share your favourite photo and video at 300Mbps wirelessly to another computer.


Connect every Ethernet device possible – no new wires, no drilling and no hassle!

Embarking on HomePlug technology - a concept of No New Wires® data communications, Aztech HomePlug transforms your in-house powerline into a networking infrastructure. Thus it successfully reduces ""dead spot"" and increases network coverage within your home.


Eco-friendly HomePlug – Green & Energy-Saving

The world’s first 200Mbps powerline Wireless-N device is built with a Wireless “On/Off” button that allows users to switch off Wireless feature when it is not needed, allowing more savings on energy.

A single unit of Aztech HL110EW consumes less than 7 watts of power, less than 100 times it takes to power up your coffee maker.


 Fuss-free Set-up with Simple Connect

No configuration or software is required to pair Aztech HomePlugs. The ""Simple Connect"" button doubles as a security feature supported with 128-bit AES Hardware encryption, ensuring the network communications is free from eavesdroppers and hackers.


 

 


Notes: 
1. Please DO NOT upgrade your device over wireless connection.
2. If the unit is working properly with the existing firmware, do not upgrade.
3. Firmware release depends from country to country, download the firmware only if you're living in the country/region.

 

Warranty Information
* 2 years

Product Images

Standards

  • Powerline : HomePlug AV
  • Wireless: IEEE 802.11b/g/n
  • Ethernet: IEEE 802.3, Auto MDI/MDIX

Protocols

  • Powerline : CSMA/CA over powerline in your home 
  • Wireless: CSMA/CA,EDCA

Modulation

  • Powerline : OFDM 1024/256/64/16/8 QAM, QPSK, BPSK, ROBO 
  • Wireless : CCK,BPSK,DQPSK, QPSK, QAM 

Frequency

  • 2MHz to 30MHz 

Total Aggregate Transmit Power

  • =13dBm  

Data Transfer Rate

  • Powerline : Up to 200Mbps over powerline 
  • Wireless : Up to 300Mbps via wireless 

Range

  • Powerline : Up to 200m over powerline 
  • Wireless : Up to 300m via wireless 

Security

  • Powerline : 128-bit AES encryption (enabled with Simple Connect button) 
  • Wireless : WEP, WPA, WPA2 

Hardware

  • Powerline : Intellon INT6400 HomePlug AV Chipset 
  • Wireless : Ralink RT3052 Wireless N Chipset 

LED Indicators

  • 1 x Power LED (PWR) 
  • 1 x PowerLine Link/ACT Status LED (PL-LKACT) 
  • 1 x Ethernet Link/ACT Status LED (ETH-LKACT) 
  • 1 x Wireless Link/Act 

External Connectors

  • 1 x Electrical Power Plug 
  • 2 x RJ45 for 10/100 Ethernet (AutoMDI/MDIX) 
  • 1 x Reset Button 
  • 1 x Push button for SimpleConnect 

Dimension

  • 105mm(H) X 58mm(W) X 42mm(D) 

Weight

  • Approx. 190g / unit 

Power Consumption

  • Norminal 7.0Watt  
  • Standby 5Wat 
  • 1.2A

Power Supply

  • AC 100 ~240V 
  • 50~60Hz 

Temperature

  • Operating: 0˚C to 40˚ C, 30% to 80% Relative Humidity 
  • Non-Operating: -25˚C to 70˚C, 30% to 95% Relative Humidity

Operating Systems

  • Windows 98 
  • Windows 98SE 
  • Windows 2000
  • Windows ME
  • Windows XP
  • Windows Vista (32/64-bit)

 

   
 
 
   
   
   
   
   
   
   
   
   
   
FirmwareSoftwareDocumentations
Notes:

1. Please DO NOT upgrade your device over wireless connection.

2. If the unit is working properly with the existing firmware, do not upgrade.

3. Firmware release depends from country to country, download the firmware only if you're living in the country/region.