Aztech VDSL2 Ethernet Bridge Modem

The Aztech VDSL2 Ethernet Bridge Modem uses Conexant Accelity Packet CPE that fully complies ITU-T G.993.2 (VDSL2), G.993.1 (VDSL), ANSI T1-424, ETSI TS 101 270, and China MII VDSL standards. The VDSL2 Ethernet Bridge Modem supports aggregated data rates up to 100Mbps. The VDSL2 Ethernet Bridge Modem supports standard 10Base-T/100Base-TX Ethernet interface cards.

The Aztech VDSL2 Ethernet Bridge Modem seamlessly extends the high-speed Internet connection, or the existing Ethernet network, to any room in the building or house with a telephone jack. The VDSL2 Ethernet Bridge Modem provides up to 100Mbps speed access at distance up to 3.65 km by sharing the existing phone line with Plain Old Telephone Service (POTS). A serial connector (RS-232) is provided for user to connect a host computer to configure or view the link or configurations.

PRODUCT SPECIFICATIONS

MAIN FEATURES

VDSL/PTM Support : • ITU-T G.993.2 (VDSL2) • ITU-T G.993.1 (VDSL1) • ANSI T1-424 • ETSI TS 101 270 • China MII VDSL standard • Long-reach support US0 Band • Fully integrated PTM support , HDLC framing and EFM framing • Programmable transmit power levels and PSD masks • Support power back off (UPBO) • DMT support • ITU-T G.99 4 .1 ( G.hs ) based hand shaking • Support Band Plan 998/997,and China Band Plan; Support 5 Band Plan up to 17.6MHz • Extended US0 band up to 276kHz • Trellis coding modulation for high performance • R-S Interleaving support standard depth, and can be greater by customer's requirement (Note 1) • Support bit swapping and Rate Adaptation Mode • EFM (IEEE802.3ah) POTS Interface Support : • Build-in Splitter (POTS Filter) Ethernet Interface Support : • IEEE 802.3/802.3u compliant • Support 10/100Mbps operation • Support half/full duplex operation • Support IEEE 802.3u clause 28-auto negotiation • Support Flow Control • Support Auto MDI/MDIX Optional Console Interface Support : • RS-232C Encapsulation Support : • Transparent Bridge (IEEE802.1d) Management Support : • Configuration and management via the console port • Update firmware image via the console port • In-band management via the Ethernet port • TFTP download firmware via an Ethernet connection • Support EOC, clear EOC, VOC Encapsulation Support : • RFC2364 PPP over ATM • RFC1483 Bridged Ethernet over ATM • RFC1483 Routed IP over ATM • RFC2516 PPP over Ethernet

CHIPSETS

Conexant Accelity Packet CPE chipsets (includes a DSP and an AFE) IC Plus IP101A Ethernet 10/100 PHY with Auto-MDI/MDIX 1MB Flash Memory

PLATFORM SUPPORT

Ethernet OS Independence

POWER ADAPTOR REQUIREMENTS

Input : 110VAC/60Hz(US), 220VAC/50Hz(China), 230VAC/50Hz(UK, SIN, Malaysia, Australia) Output : 12VDC +/-10% / 0.8A

PHYSICAL SPECIFICATIONS

1 x RJ-11 telephone socket for VDSL Line 1 x RJ-11 telephone socket for POTS Line 1 x RJ-45 for 10Base-T/100Base-TX Ethernet (Auto MDI/MDI-X) 1 x DB9 for Console Port (Optional) 1 x DC Jack for DC Input 1 x ON/OFF Power Switch (population option)

LED Indicators

1 x Power LED 1 x Ethernet Link/Activity LED 1 x DSL Link/Activity LED

REGULATORY APPROVALS (Pending)

US: FCC Part 15/68, UL 3rd Edition China: CCIB GB9254/GB4943, MII Asia Pacific/Europe: CE (EN55022: 98/EN55021: 98), IEC60950

Temperature

Operating: 0° to 40 ° Celsius / 32 ° to 1 04 ° Fahrenheit Non-Operating: -25 ° to 70 ° Celsius / -13 ° to 1 58 ° Fahrenheit

Humidity

Operating: 30 % to 80 % Relative Humidity (Non-Condensing) Non-Operating: 10 % to 95 % Relative Humidity (Non-Condensing)