Home mail to us Follow Us on Twitter! Follow Us on Facebook!
Investor Relations
LED Lighting
Contract Manufacturing
Retail Brand
Contact Us
31 Ubi Road 1,
Aztech Building,
Singapore 408694,
Tel: (65) 6594-2288
Fax: (65) 6749-1198
  Wireless Extender - WL556E Full Range of OEM Products  

WL556E – Aztech Portable 300Mbps Wireless-N Extender

Aztech WL556E is a Portable 300Mbps Wireless-N Extender, which supports wireless 802.11b/g/n, and one 10/100Base-T Ethernet port.

Repeat and Extend the WiFi Network
WL556E supports robust 802.11n technology with up to 300Mbps data transfer rate. The device can take an existing 802.11n wireless signal, repeat and send it to a longer range where it is too far away for the router or access point to reach. It eliminates the cable wires while providing the same reliable network connection. It can repeat and extend the wireless signal from virtually any 802.11n wireless router or access point that is launched on the market. It is backwards compatible with the 802.11b/g router or access point.

Make Wired Network WiFi Ready
The device is equipped with 1 x 10/100M Auto MDI/MDIx LAN port that can be used to connect to an existing wired network to serve as a wireless interface. It can also be used to configure the extender via its web-based GUI, or upgrade the firmware.

MIMO Technology
The device is designed with MIMO technology, which successfully reduces ‘dead spot’, and extends network coverage within a home or in the building.

Advanced Security
WL556E features with 64/128-bit WEP encryption and WIFI Protected Access (WPA), WPA2 to ensure the network security and prevent unauthorized access to you network.

Portable without the Need of External Power Supply
The device is easy to setup. It is portable with no need of any external power adaptor. It comes with the embedded power supply and power plug, so that users can just plug the device into a power socket.

Main Features:
  • Supports ratified 802.11n technology with the data transfer rate up to
  • Repeats and extends existing wireless signal to areas where the router or
    access point is not able to reach.
  • Shares large files, printing and storage quickly and reliably in wider range in
    your home or office.
  • Eliminates the use of cable wires while providing reliable wireless connection.
  • Enables wired network wireless ready through the LAN port
  • MIMO technology to reduce “dead spot” and increase network coverage.
  • WEP, WPA, and WPA2 to ensure network security from unauthorized access.
  • User-friendly web-based GUI and easy hardware setup. Portable, no need of
    external power adaptor.


Wireless IEEE802.11n, IEEE802.11b/g
Ethernet IEEE 802.3 10/100, IEEE802.3u, IEEE802.3ab
Network Support
OFDM 1024/256/64/16/8 QAM, QPSK, BPSK and ROBO Modulation Scheme Wireless
IEEE802.11n: BPSK, QPSK, QAM-16, QAM-64
IEEE802.11g: BPSK, QPSK, QAM-16, QAM-64
Wireless Frequency Band
Europe (ETSI): 2.412GHz ~ 2.742GHz (CH1 ~ CH13)
Security Support

Wireless: 64/128-bit WEP, WPA, WPA2

Key Chipset: Ralink RT3052 Network Processor + WLAN Controller
SPI FlashRom: 4M Byte (Default), 8M Byte (Option)
SDRAM: 16M Byte
OS Independent with TCP/IP protocol installed
Supply voltage range: 100VAC – 240VAC (50/60 Hz)
Power Consumption : Less than 4W
Max Current : 0.12A
LED Indicators:
o 1 x Power : Green
o 1 x Ethernet : Green
o 1 x Wireless on/off : Green
o 1 x WPS button and LED : Green
External Connectors:
o 1 x RJ45 for 10/100Base-T LAN
o 1 x Factory Default Reset Button
o 2 x Internal antennas
o Dimension : 105(L) x 58 (W) x 42 (H) mm
o Weight : 160 g
Europe : CE, CB
Asia Pacific/ Europe : CE, IDA
Operating : 0°C to 40°C
Non-Operating :-25°C to 70°C
Operating : 30% to 90% Relative Humidity (Non-Condensing)
Non-Operating : 30% to 95% Relative Humidity (Non-Condensing)

NOTE : Specifications subject to change without prior notice.

back to top