Wireless-N miniPCI module

Aztech WL200M is a mini-PCI type MIMO wireless module that operates
on 2.4GHz frequency band. The module uses Ralink’s intelligent NIC(iNIC)
chip RT2880, which drastically reducing the load on the host platform,
such as DSL or Cable Gateways. The WLAN iNIC can also be used as a
simple Ethernet device for easy porting and guaranteed draft 802.11n
WLAN performance without the need to upgrade to an expensive host
SOC.

Aztech WL200M fully complies with 802.11n draft 2.0 spec and
802.11b/g standards. With two bandwidth technology 20MHz/40MHz, it
provides high-speed wireless connection rate of up to 300Mbps. This
MIMO wireless module has 2 transmitting paths and 3 receiving paths,
and it could be flexibly connected with internal or external antennae.
Security features such as WEP, WPA-PSK, TKIP, AES, and MAC filtering are
also packed in.

The Aztech wireless module can be easily integrated into multimedia
streaming platforms such as gateways, set-top boxes, mobile and handheld
devices.

PRODUCT SPECIFICATIONS

Standards

IEEE 802.11b/g/n (draft 2.0)

Chipset

Ralink RT2880, RT2820

Memory

2kbit EEPROM, 8MB SDRAM

Antenna

2T3R, IPEX connector

Form Factor

Mini-PCI type III B

Power Requirement

3.3VDC

Power Consumption

up to 2 Watts

Frequency Band & Channels

North America 2.412GHz ~ 2.462GHz (1-11 channels) Europe 2.412GHz ~ 2.472GHz (1-13 channels) Japan 2.412GHz ~ 2.472GHz (1-14 channels)

Modulation

802.11b: DSSS 802.11g: OFDM 802.11n: OFDM

Wireless Transmit Power

802.11b: 18dBm 802.11g: 14dBm 802.11n(2T): 14dBm

Wireless Receiving Sensitivity

802.11b: -80dBm @ 11Mbps 802.11g: -72dBm @ 54Mbps

Security

WEP (64-bit/128-bit) WPA-PSK, WPA2-PSK TKIP, AES Hidder SSID, MAC Filtering

Operation Environment

Temperature: 0˚C to 40˚C Humidity: 30% to 80% relative humidity

Storage Environment

Temperature: -25˚C to 70˚C Humidity: 30% to 95% relative humidity

Physical Dimensions

59.75mm x 44.60 mm