Homeplug, powerline adapter, 85mbps homeplug

Headquarters:
31 Ubi Road 1,
Aztech Building,
Singapore 408694,
Tel: (65) 6594-2288
Fax: (65) 6749-1198

World's Smallest 85Mbps HomePlug Turbo Powerline Adapter

Aztech HL106E 85Mbps powerline adaptor allows users to connect 10/100Mbps Ethernet devices to their home powerline. This not only conveniences users for home network access but it reduces re-wiring cost. HL106E design is based on Intellon INT1200 and INT5500 (85Mbps) solution.

Aztech HL106E utilizes switching mode power supply, therefore it can be used for worldwide market.

Aztech HL106E fully complies with RoHS requirement.

PRODUCT SPECIFICATIONS

Main features

	Backward compatible to HomePlug 1.0.
	Full Rate transmission up to 85 Mbps
	Installs with Plug-and Play convenience

Protocol/Standards

	HomePlug 1.0 specification, IEEE 802.3 10/100 Ethernet (100Mbps) and IEEE 802.3u Fast Ethernet Compliant
	10/100 Mbps AutoMDI/MDIx Support
	85Mbps Homeplug 1.0 compatible

Modulation Support

OFDM 256/64/16, DQPSK, DBPSK and ROBO Modulation Scheme

Frequency Band

4.3 Mhz to 20.9 Mhz band

Quality of Service

	Forward Error Correction (FEC) support
	Channel Adaptation ensures that signal integrity is maintained even under harsh noise environment
	CSMA/CA with prioritization and ARQ for reliable delivery of Ethernet packets via Packet Encapsulation
	Four Level prioritized random access method
	Segment bursting and contention-free access ensures high throughput while maintaining low latency response and jitter performance

Security Support

56 bit DES Encryption with key management for secure powerline communications (Utilise Windows 98SE, 2000, ME, XP to enable encryption)

HARDWARE

	Intellon INT5500 Integrated Single-chip Powerline Network Transceiver
	Intellon INT1200 Analog Front End IC
	IP101A Ethernet PHY (Auto MDI/MDIX)

PLATFORM SUPPORT

OS Independent with TCP/IP protocol installed

POWER SUPPLY

	Input Voltage : 100Vac - 240Vac
	Input Current : 0.06A max
	Frequency : 50/60Hz

LED Indicators

	1 x Power LED (PWR)
	1 x Powerline Link/ACT Status LED (PL-LKACT)
	1 x Ethernet Link/ACT Status LED (ETH-LKACT)

TEMPERATURE

	Operating : 0° to 40° C
	32° to 113° F
	Non-Operating : -25° to 70° C
	-13° to 158° F

HUMIDITY

	Operating : 30% to 90% Relative Humidity (Non-Condensing)
	Non-Operating : 30% to 95% Relative Humidity (Non-Condensing)

Range

Up to 200metre (distance of powerline)

Transmission Rate

Up to 85Mbps

Regulatory Approvals

	Safety IEC60950
	USA: FCC Part 15 (TBD)
	Europe: CE Mark

NOTE : Specifications are subject to change without prior notice.