The Aztech HL100E Homeplug Ethernet Adaptor, based on Intellon's advanced INT52MX SIMPLE PowerPacket tm Module is HomePlug 1.0 compliant and provides data rates up to 14 mb/s

It comes in three models :
• HL100E(US) – 110V AC US Model
• HL100E(UK) – 230V AC UK Model
• HL100E(EUR) – 230V AC European Model

Targeted at the residential users, it is a Homeplug 1.0 to Ethernet 10 Bridge device converting any power socket to a network point enabling Broadband internet sharing to any existing Cable/DSL Router, extension of the DSL/Cable Modem installation, Online-Gaming, VoIP Calls, Audio-Video transmission across the network as well as Network camera connectivity.

Easy to install and use, it plugs straight in to any existing wall electrical socket while having a low power consumption, it comes with 56 bit DES encryption ensuring that your network communications is free from eavesdroppers and hackers. The AutoMDI/MDIX functionality of the HL100E also simplifies and ensures a hassle free installation.

PRODUCT SPECIFICATIONS

Protocol/Standards

HomePlug 1.0 specification, IEEE 802.3 10Base-T Ethernet (10Mbps) Compliant 10 Mbps AutoMDI/MDIx Support 14 Mbps Homeplug 1.0 compatible CSMA/CA MAC control

Modulation Support

OFDM, DQPSK, DBPSK, ROBO Carrier Modulation Support

Frequency Band

4.3 Mhz to 20.9 Mhz band

Quality of Service

Forward Error Correction (FEC) support Channel Adaptation ensures that signal integrity is maintained even under harsh noise environment CSMA/CA with prioritization and ARQ for reliable delivery of Ethernet packets via Packet Encapsulation Four Level prioritized random access method Segment bursting and contention-free access ensures high throughput while maintaining low latency response and jitter performance

Security Support

56 bit DES Encryption with key management for secure powerline communications (Utilise Windows 98SE, 2000, ME, XP to enable encryption)

HARDWARE

Intellon INT52MX Simple PowerPacket Module Kendin KS8721B AutoMDI/MDIX 10/100 Ethernet PHY

PLATFORM SUPPORT

OS Independent with TCP/IP protocol installed

POWER SUPPLY

Integrated 230V AC Supply via Power Socket for Europe/UK model Integrated 110V AC Supply via Power Socket for US Model

LED Indicators

1 x Power LED 1 x Powerline Link Status LED 1 x Ethernet Link/Activity Status LED

External Connectors

1 x Electrical Power socket 1 x RJ45 for 10Base-T Ethernet (AutoMDI/MDI-X)

Measurements

Dimension : 92 mm x 66mm x 45mm (not including pins) Weight : approx 180g