ADSL2+ Ethernet Modem

The Aztech DSL705E ADSL2+ Ethernet MODEM ROUTER is designed with the latest Infineon Amazon SE chip solution that fully complies with ANSI T1.413 Issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) ADSL standard. Aztech DSL705E also provides higher data transmission rates with ADSL2 (G.992.3 & G.992.4), ADSL2+ (G.992.5), Extended Reach-ADSL support. This modem/router is able to support to up to 12Mbps speed and additional 600 feet reach for ADSL2 and 26Mbps speed for distances up to 5,000 feet for ADSL2+.

Targeted at the residential users, it is for both the single user with Bridge mode with host based PPPoE Client or for multi-users utilizing the DSL705E inbuilt PPPoE/A, IP routing, NAT functionality to share the ADSL link.

Aztech DSL705E also comes with Stateful Packet Inspection firewall and DMZ support for extensive internet security for private data against malicious hackers.

PRODUCT SPECIFICATIONS

ADSL/ATM Support

ANSI T1.413 issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) compliant G.992.3(ADSL2), G.992.5(ADSL2+), RE-ADSL compliant ADSL2, ADSL2+, RE-ADSL compliant Rate Adaptive modem at 32 Kbps steps Dynamic Adaptive Equalization to improve Carrier’s service area Bridge Tap Mitigation support ATM Layer with Traffic shaping QoS Support (UBR, CBR, VBR-rt, VBR-nrt) AAL ATM Attributes - AAL5 Multiple PVC up to 8 support (Bridge Support) Spectral compatibility with POTS F4 & F5 OAM Loop back/Send and Receive Annex B Option available TR-067 Compliant

Encapsulation Support

RFC2684 Bridge and Routed LLC and VC Mux support RFC2364 PPPoA Client support RFC2516 PPPoE Client support Transparent Bridge Support PAP/CHAP/MS-CHAP for Password Authentication Support

Network Support

Static IP support IP/TCP/UDP/ICMP/ARP/RARP Application Support Network Address Translation (NAT) Port Forwarding Easy setup of Port Forwarding rules for popular Games/Application NAT Application Level Gateway for popular applications DHCP Server/Relay/client DNS Relay Agent DMZ support Multiple Sessions IP Sec and PPTP/L2TP VPN pass through support PPP Always on with configurable timeout PPP Dial on Demand Universal Plug and Play Support (UPnP) SNTP Support QoS Support (DSCP, TOS) PPP/DHCP Auto Detection

Management Support

Web Based HTTP management GUI Web Based Firmware Upgrade (Local) Soft Factory Reset Button via Web GUI Diagnostic Test (DSL, OAM, Network, Ping Test) Telnet Syslog Support Firmware upgradeable for future Feature Enhancement TR-064, TR-069 support option

Security Support

NAT for basic Firewall support Packet Filtering Firewall Support Parental Control Support Application Filtering Support Password Authentication to Modem

Hardware

Infineon Amazon-SE PSB50600 Chip 2 MB Flash ROM (Population Option of 4MB) 8 MB SDRAM (Population Option of 16MB) Dying Gasp Support (Population Option) ITU K.21 Support GDT Support (Population Option) Compliant to TR-068 spec for LED and Connectors

Platform support

For Ethernet : -OS Independent

Power Requirements

Input Voltage : 12V DC +/- 10% Input Current : 0.42A

Physical Specifications

LED Indicators : - 1 x "Power" (Green/Red) LED - 1 x "Ethernet" Link/Activity Status (Green) LED - 1 x “DSL” Link Status (Green) LED - 1 x “Internet” (Green/Red) LED External Connectors : - 1 x RJ-11(Gray Color) Telephone socket for ADSL line - 1 x RJ45(Yellow Color) for 10/100Base-T Ethernet - 1 x DC Jack for Power Input - 1 x Factory Default Reset Button - 1 x On/Off Push Button Switch Measurements : - Dimension : 105mmx85mmx27mm

Temperature

Operating : 0°C to 40°C Non-Operating : -25°C to 70°C

Humidity

Operating : 8% to 95% Relative Humidity (Non-Condensing) Non-Operating : 5% to 95% Relative Humidity (Non-Condensing)