::: Aztech :::

Headquarters:
31 Ubi Road 1,
Aztech Building,
Singapore 408694,
Tel: (65) 6741-7211
Fax: (65) 6749-1198

Aztech ADSL 2/2+ READY WIRELESS LAN 802.11g 4 PORT ETHERNET USB COMBO ROUTER (DSL 600EW)

The Aztech DSL600EW ADSL2/2+ Ready Wireless LAN 802.11g 4 Port Ethernet USB Combo Routers uses Texas Instruments AR7W Chipset solution that fully complies to ANSI T1.413 Issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) ADSL standard. Aztech DSL600EW also provides future proof functionality with higher data transmission rates with ADSL2, ADSL2+, Extended Reach-ADSL support.

Targeted at the residential and SOHO users, it is the ideal solution to provide a 6 in 1 device for both Wired and Wireless connectivity via a combined ADSL2/2+ Ready Modem support, Routing functionality for multi-user sharing, 4 port AutoMDI/MDIx 10/100 Switch, USB port, high speed 54Mbps IEEE802.11b/g Wireless LAN Access point and true firewall capability functionality.

Security is provided via a double Stateful Packet Inspection and NAT based firewall and Hardware accelerated AES/WEP/WPA based encryption/MAC Address Filtering for Wireless links. VPN Passthrough and DMZ support provide additional security support for telecommuters as well as allow flexibility while maintaining security against malicious hackers.

* ANNEX B option is available

PRODUCT SPECIFICATIONS

ADSL/ATM Support

	ANSI T1.413 issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) compliant
	ADSL2, ADSL2+, RE-ADSL Ready
	Rate Adaptive modem at 32 Kbps steps
	Dynamic Adaptive Equalisation to improve Carrier's service area
	Bridge Tap Mitigation support
	ATM Layer with Traffic shaping QoS Support (UBR, CBR, VBR-rt, VBR-nrt)
	AAL ATM Attributes - AAL5
	Multiple PVC up to 8 support
	Spectral compatibility with POTS
	F5 OAM Loopback/Send and Receive

Encapsulation Support

	RFC2684 Bridge and Routed LLC and VC Mux support
	RFC2364 PPPoA Client support
	RFC2516 PPPoE Client support
	RFC2225/RFC1577 Classical IP Support
	Transparent Bridge Support
	PAP/CHAP/MS-CHAP for Password Authentication Support

Network Support

	Static IP, Dynamic RIP routing support
	IP/TCP/UDP/ICMP/ARP/RARP Application Support
	Network Address Translation (NAT)
	Port Mapping/Forwarding
	Easy setup of Port Forwarding rules for popular Games/Application
	NAT Application Level Gateway for popular applications
	DHCP Server/Relay/client
	DNS Relay Agent
	DMZ support
	Single Session IP Sec and PPTP/L2TP VPN pass through support
	PPP Always on with configurable timeout
	PPP Dial on Demand

WLAN Support

	IEEE 802.11, 802.11b and 802.11g compliant
	Conforms to Wireless Ethernet Compatibility Alliance (WECA) Wireless Fidelity (Wi-Fi tm) Standard
	Supports 802.11b and 802.11g simultaneously
	Support seamless WLAN roaming
	Frequency Band : • 2412 MHz - 2462 MHz (North America/FCC) • 2412 MHz - 2472 MHz (ETSI/Europe) • 2412 MHz - 2484 MHz (Japan) • 2457 MHz - 2472 MHz (France) • 2457 MHz - 2462 MHz (Spain)
	Support Direct Sequence Spread Spectrum (DSSS) technology
	Modulation : OFDM with BPSK, QPSK, 16QAM, 64QAM, DBPSK, DQPSK, CCK
	Wireless Media Access Protocol- CSMA/CA with ACK
	Dynamic Rate Scaling from 54, 48, 36, 24, 12, 11, 9, 6, 5.5, 2, 1 Mb/s
	Operating Range of >300 Meters (Open Air)

Management Support

	Web Based HTTP management GUI
	TFTP/FTP Support for Firmware Upgrade
	Web Based Firmware Upgrade (Local)
	Soft Factory Reset Button via Web GUI
	Diagnostic Test (DSL, OAM, Network, Ping Test)
	Telnet/CLI (Read Only)
	Syslog Support
	Firmware upgrade-able for future feature enhancement

Security Support

	NAT for basic Firewall support
	Packet Filtering Firewall Support
	Stateful Packet Inspection Support
	Protection against Denial of Service attacks
	Password Authentication to Modem

HARDWARE

	Texas Instrument TNETD7300 Single Chip Network Processor/AFE/Line Driver Chipset
	Marvell 88E6060-RCJ 5+1 Port 10/100 MAC/PHY Switch (Support Auto MDI/MDIx)
	Texas Instrument TNETW1130 based IEEE802.11b/g MiniPCI Daughter Board
	USB 1.1 Compliant
	4 MB Flash ROM
	16 MB SDRAM
	Dying Gasp Support
	ITU K.21 Support

PLATFORM SUPPORT

	For Ethernet and Wireless LAN • OS Independent for Ethernet
	For USB • Windows 98SE • Windows ME • Windows 2000 • Windows XP • Windows 2003

POWER REQUIREMENTS

	Input Voltage : 9V DC +/- 10%
	Input Current : 1.0A

LED Indicators

	1 x Internet Status LED (Green LED)
	1 x Power LED (Green and Red LED)
	1 x DSL Status LED (Green, Red and Amber) LED
	4 x Ethernet Link Status LED (Green LED)
	1 x USB Link Status LED (Green LED)
	1 x Wireless LAN Link/Activity Status (Green) LED

External Connectors

	1 x RJ-11 Telephone socket for ADSL line
	1 x RJ-11 Telephone socket (FXS)
	4 x RJ45 for 10/100Base-T Ethernet (AutoMDI/MDIx)
	1 x USB 1.1 Type B interface
	1 x DC Jack for Power Input
	1 x Factory Default Reset Button
	1 x On/Off Power Switch
	1 x Co-axial Connector for Detachable 180 ° Rotate-able 2.4Ghz 3 dBi Antenna

Measurements

	Dimension : 176.5 (L) x 118.9 (W) x 37.9 (H) mm
	Weight : Approx. 450 g

NOTE : Specifications are subject to change without prior notice.