Aztech ADSL 2+ VoIP Wireless 802.11g Residential Gateway

The Aztech DSL600EVW ADSL2/2+ VoIP Wireless LAN 802.11g 4 Port Ethernet USB Combo Routers integrates a ADSL modem, router, firewall, Wireless B/G Access Point, 4 Port Ethernet Switch, USB Port and VoIP SIP phone in one device. Users need only use an existing analog or DECT telephone connected to the DSL600EVW to enjoy the benefits of a low cost VoIP call. Having an integrated ADSL modem/router with VoIP functionality simplifies the installation and provides simultaneous VoIP and Data access. Data access is provided via Wireless options via high speed 802.11b/g or Wired option via 4 port Ethernet or USB. With the Easy Connect technology, networking becomes a breeze.

DSL600EVW uses Texas Instruments AR7VW Chipset solution that fully complies to ANSI T1.413 Issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) ADSL standard. Aztech DSL600EVW also supports higher data transmission rates with ADSL2, ADSL2+, Extended Reach-ADSL support. This next generation ADSL will be providing up to 12Mbps speed and additional 600 feet reach for ADSL2 and 26Mbps speed for distances up to 5,000 feet for ADSL2+. Scalable, cost effective and easy to use, DSL600EVW is the ideal data and voice communication solution to meet the needs of today and the future.

Security is provided via a double Stateful Packet Inspection and NAT based firewall and Hardware accelerated AES/WEP/WPA based encryption/MAC Address Filtering for Wireless links. VPN Passthrough and DMZ support provide additional security support for telecommuters as well as allow flexibility while maintaining security against malicious hackers.

With Universal Plug and Play support, home networking becomes a breeze for everyone in the family. Multi Port Range/Popular Application Forwarding makes it even easier to select which application you want your network to allow while ensuring your security at the same time.

PRODUCT SPECIFICATIONS

ADSL/ATM Support

ANSI T1.413 issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) compliant ITU-T G.992.1 (G.dmt Annex B) Population Option ADSL2, ADSL2+, RE-ADSL Compliant TR-067 Compliant TR-064 Compliant TR-068, TR-069 Compliant (Future Firmware Upgrade) Rate Adaptive modem at 32 Kbps steps Dynamic Adaptive Equalisation to improve Carrier's service area Bridge Tap Mitigation support ATM Layer with Traffic shaping QoS Support (UBR, CBR, VBR-rt, VBR-nrt) AAL ATM Attributes - AAL5 Multiple PVC up to 8 support Spectral compatibility with POTS F5 OAM Loopback/Send and Receive

Voice Support

RFC3261 SIP Version 2 support RTP/RTCP (RFC1889, 1890) Dynamic Jitter Buffer (Adaptive) G.711 Annex1/2, G.729AB, G.723.1A, G.726 support Bellcore, ETSI caller ID detection/generation QoS Support TOS/Diff-serv V.21, V.27ter, V.29, V.17 Fax Relay T.38U Fax over IP protocol Conferencing Support Comfort Noise Generation Silence Suppression 32ms Echo Cancellation G.168-2005 Support DTMF Tone Generation/Detection DTMF In-Band and Outband RFC2833 and RTP Relay Telephony Features : CallerID, Call Waiting, Message Waiting, Three Way Conference call (Depends on IP Telephony Service Provider) Power Bypass PSTN Lifeline support Make a PSTN Call by Prefix number (Optional) PSTN Relay when VoIP Service is not available (Optional) Receive Incoming PSTN Phone Call (Optional)

Encapsulation Support

RFC2684 Bridge and Routed LLC and VC Mux support RFC2364 PPPoA Client support RFC2516 PPPoE Client support RFC2225/RFC1577 Classical IP Support Transparent Bridge Support PAP/CHAP for Password Authentication Support

Network Support

Static IP, Dynamic RIP routing support IP/TCP/UDP/ICMP/ARP Application Support Network Address Translation (NAT) Multi Range Port Mapping/Forwarding Easy setup of Port Forwarding rules for popular Games/Application Easy Connect Support ensuring that user need not change any PC settings NAT Application Level Gateway for popular applications IGMP V1/2 Support DHCP Server/Relay/client Dynamic DNS support DNS Relay Agent DMZ support Single Session IP Sec and PPTP/L2TP VPN pass through support PPP Always on with configurable timeout PPP Dial on Demand Universal Plug and Play Support

WLAN Support

IEEE 802.11, 802.11b and 802.11g compliant Supports 802.11g+ Packet Bursting and 4X Support increasing throughput support Conforms to Wireless Ethernet Compatibility Alliance (WECA) Wireless Fidelity (Wi-Fi tm ) Standard Supports 802.11b and 802.11g simultaneously Support seamless WLAN roaming Frequency Band : • 2412 MHz - 2462 MHz (North America/FCC) • 2412 MHz - 2472 MHz (ETSI/Europe) • 2412 MHz - 2484 MHz (Japan) • 2457 MHz - 2472 MHz (France) • 2457 MHz – 2462 MHz (Spain) Support Direct Sequence Spread Spectrum (DSSS) technology Modulation : OFDM with BPSK, PBCC, QPSK, 16QAM, 64QAM, DBPSK, DQPSK, CCK Wireless Media Access Protocol- CSMA/CA with ACK Dynamic Rate Scaling from 54, 48, 36, 24, 12, 11, 9, 6, 5.5, 2, 1 Mb/s 64/128/256Bit WEP Encryption WPA Support Radius Support for 802.1x Operating Range up to 300 Meters (Open Air)

Management Support

Web Based HTTP management GUI TFTP Support for Firmware Upgrade Web Based Firmware Upgrade (Local) Soft Factory Reset Button via Web GUI Diagnostic Test (DSL, OAM, Network, Ping Test) Telnet (Read Only) Syslog Support Firmware upgrade-able for future feature enhancement

Security Support

NAT for basic Firewall support Packet Filtering Firewall Support Stateful Packet Inspection Support URL Blocking Support Protection against Denial of Service attacks Password Authentication to Modem

HARDWARE

Texas Instrument TNETD7300A Single Chip Network Processor/AFE/Line Driver Chipset Texas Instrument TNETV921 Voice DSP Marvell 88E6060-RCJ 5+1 Port 10/100 MAC/PHY Switch (Support Auto MDI/MDIx) Texas Instrument TNETW1130 based IEEE802.11b/g MiniPCI Daughter Board USB 1.1 Compliant 4 MB Flash ROM 16 MB SDRAM Dying Gasp Support ITU K.21 Support

PLATFORM SUPPORT

For Ethernet and Wireless LAN • OS Independent For USB • Windows 98SE • Windows ME • Windows 2000 • Windows XP

POWER REQUIREMENTS

Input Voltage : 12V DC +/- 10% Input Current : 0.8A

3.0 PHYSICAL SPECIFICATIONS

LED Indicators : • 1 x Internet Status LED (Green LED) • 1 x Power LED (Green and Red LED) • 1 x DSL Status LED (Green LED) • 4 x Ethernet Link Status LED (Green LED) • 1 x USB Link Status LED (Green LED) • 1 x VoIP ready LED (Green LED) • 1 x Wireless LAN Link/Activity Status (Green) LED External Connectors : • 1 x RJ-11 Telephone socket for ADSL line • 1 x RJ-11 Telephone socket (FXS) • 4 x RJ45 for 10/100Base-T Ethernet (AutoMDI/MDIx) • 1 x USB 1.1 Type B interface • 1 x DC Jack for Power Input • 1 x Factory Default Reset Button • 1 x On/Off Power Switch • 1 x Co-axial Connector for Detachable 180 ° Rotate-able 2.4Ghz 3 dBi Antenna Measurements : • Dimension : 176.5 (L) x 118.9 (W) x 37.9 (H) mm • Weight : Approx. 450 g