Aztech ADSL 2/2+ Ready Ethernet USB Combo Bridge/Router (DSL 600EU)

The Aztech DSL600EU ADSL Ethernet USB Combo Bridge/Router Modem uses Texas Instruments AR7 Chipset solution that fully complies to ANSI T1.413 Issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) ADSL standard. Aztech DSL600EU also provides future proof functionality with higher data transmission rates with ADSL2, ADSL2+, Extended Reach-ADSL support.

Targeted at the residential users, it is for both the single user with Bridge mode with host based PPPoE Client or for multi-users utilizing the DSL600EU inbuilt PPPoE/A, IP routing, NAT functionality to share the ADSL link.

It comes with Stateful Packet Inspection firewall and DMZ support for a full security options against malicious hackers.

PRODUCT SPECIFICATIONS

ADSL/ATM Support

ANSI T1.413 issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) compliant ADSL2, ADSL2+, RE-ADSL compliant Rate Adaptive modem at 32 Kbps steps Dynamic Adaptive Equalisation to improve Carrier's service area Bridge Tap Mitigation support ATM Layer with Traffic shaping QoS Support (UBR, CBR, VBR-rt, VBR-nrt) AAL ATM Attributes - AAL5 Multiple PVC up to 8 support (Bridge Support) Spectral compatibility with POTS F5 OAM Loopback/Send and Receive

Encapsulation Support

RFC2684 Bridge and Routed LLC and VC Mux support RFC2364 PPPoA Client support RFC2516 PPPoE Client support RFC2225/RFC1577 Classical IP Support Transparent Bridge Support PAP/CHAP/MS-CHAP for Password Authentication Support

Network Support

Static IP, Dynamic RIP routing support IP/TCP/UDP/ICMP/ARP/RARP Application Support Network Address Translation (NAT) Port Mapping/Forwarding Easy setup of Port Forwarding rules for popular Games/Application NAT Application Level Gateway for popular applications DHCP Server/Relay/client DNS Relay Agent DMZ support Single Session IP Sec and PPTP/L2TP VPN pass through support PPP Always on with configurable timeout PPP Dial on Demand

Management Support

Web Based HTTP management GUI TFTP/FTP Support for Firmware Upgrade Web Based Firmware Upgrade (Local) Soft Factory Reset Button via Web GUI Diagnostic Test (DSL, OAM, Network, Ping Test) Telnet/CLI (Read Only) Syslog Support Firmware upgrade-able for future feature enhancement

Security Support

NAT for basic Firewall support Packet Filtering Firewall Support Stateful Packet Inspection Support Protection against Denial of Service attacks Password Authentication to Modem

Hardware

Texas Instrument TNETD7300 Single Chip Network Processor/AFE/Line Driver Chipset 2 MB Flash ROM 8 MB SDRAM Dying Gasp Support ITU K.21 Support

Platform support

For Ethernet : - OS Independent For USB : - Windows 98SE - Windows ME - Windows 2000 - Windows XP - Windows 2003

Power Requirements

Input Voltage : 9V DC +/- 10% Input Current : 1A

Physical Specifications

1 x PPP LED 1 x Power LED 1 x DSL Link Status LED 1 x Ethernet Link/Activity Status LED 1 x USB Status LED

External Connectors

1 x RJ-11 Telephone socket for ADSL line 1 x RJ45 for 10/100Base-T Ethernet (MDI-X) 1 x USB 1.1 Type B 1 x DC Jack for Power Input 1 x Factory Default Reset Button

Measurements

Dimension : 144 (L) x 109 (W) x 30 (H) mm Weight : Approx. 250g