::: Aztech :::

Headquarters:
31 Ubi Road 1,
Aztech Building,
Singapore 408694,
Tel: (65) 6741-7211
Fax: (65) 6749-1198

Aztech ADSL ANNEX B 4 PORT ETHERNET ROUTER (DSL600ER(B))

The Aztech DSL600ER(B) ADSL ANNEX B 4 Port Ethernet Routers uses Texas Instruments AR7 Chipset solution that fully complies to ITU-T G.992.1 Annex B (G.dmt) ADSL standard.

Targeted at the residential and SOHO users, it is the ideal solution to provide a 4 in 1 device for both high speed broadband connectivity via a combined ADSL Modem support, Routing functionality for multi-user sharing, 4 port AutoMDI/MDIx 10/100 Switch and true Firewall capability functionality.

Security is provided via a double Stateful Packet Inspection and NAT based Firewall. VPN Passthrough and DMZ support provide additional security support for telecommuters as well as allow flexibility while maintaining security against malicious hackers.

PRODUCT SPECIFICATIONS

ADSL/ATM Support

	ITU-T G.992.1 Annex B (G.dmt) compliant
	ADSL over ISDN Support
	Rate Adaptive modem at 32 Kbps steps
	Dynamic Adaptive Equalisation to improve Carrier's service area
	Bridge Tap Mitigation support
	ATM Layer with Traffic shaping QoS Support (UBR, CBR, VBR-rt, VBR-nrt)
	AAL ATM Attributes - AAL5
	Multiple PVC up to 8 support
	Spectral compatibility with POTS
	F5 OAM Loopback/Send and Receive

Encapsulation Support

	RFC2684 Bridge and Routed LLC and VC Mux support
	RFC2364 PPPoA Client support
	RFC2516 PPPoE Client support
	RFC2225/RFC1577 Classical IP Support
	Transparent Bridge Support
	PAP/CHAP/MS-CHAP for Password Authentication Support

Network Support

	Static IP, Dynamic RIP routing support
	IP/TCP/UDP/ICMP/ARP/RARP Application Support
	Network Address Translation (NAT)
	Port Mapping/Forwarding
	Easy setup of Port Forwarding rules for popular Games/Application
	NAT Application Level Gateway for popular applications
	DHCP Server/Relay/client
	DNS Relay Agent
	DMZ support
	Single Session IP Sec and PPTP/L2TP VPN pass through support
	PPP Always on with configurable timeout
	PPP Dial on Demand

Management Support

	Web Based HTTP management GUI
	TFTP/FTP Support for Firmware Upgrade
	Web Based Firmware Upgrade (Local)
	Soft Factory Reset Button via Web GUI
	Telnet/CLI (Read Only)
	Syslog Support
	Firmware upgrade-able for future feature enhancement

Security Support

	NAT for basic Firewall support
	Packet Filtering Firewall Support
	Stateful Packet Inspection Support
	Protection against Denial of Service attacks
	Password Authentication to Modem

Hardware

	Texas Instrument TNETD7300 Single Chip Network Processor/AFE/Line Driver Chipset
	Marvell 88E6060-RCJ 5+1 Port 10/100 MAC/PHY Switch (Support Auto MDI/MDIx
	2 MB Flash ROM
	8 MB SDRAM
	Dying Gasp Support
	ITU K.21 Support

Platform support

OS Independent for Ethernet

Power Requirements

	Input Voltage : 9V DC +/- 10%
	Input Current : 1.0A

LED Indicators

	1 x Internet (Green) LED
	1 x Power (Green and Red) LED
	1 x DSL (Green, Red and Amber) Link Status LED
	4 x Ethernet Link/Activity Status (Green) LED

External Connectors

	1 x RJ-11 Telephone socket for ADSL line
	4 x RJ45 for 10/100Base-T Ethernet (AutoMDI/MDIx)
	1 x DC Jack for Power Input
	1 x Factory Default Reset Button
	1 x On/Off Power Switch

Measurements

	Dimension : 176.5 (L) x 118.9 (W) x 37.9 (H) mm
	Weight : Approx. 350 g

REGULATORY APPROVALS (pending)

	Europe : CE (EN55022:98/EN55024: 98), IEC950
	USA : FCC Part 15B, FCC Part 68, UL1950 3rd edition

TEMPERATURE

	Operating : 0 o to 40 o Celsius
	32 o to 104 o Fahrenheit
	32 o to 104 o Fahrenheit
	-13 o to 158 o Fahrenheit

HUMIDITY

	Operating : 30% to 80% Relative Humidity (Non-Condensing)
	Non-Operating : 30% to 95% Relative Humidity (Non-Condensing)

NOTE : Specifications are subject to change without prior notice.