Aztech ADSL 2/2+ READY 4 PORT ETHERNET ROUTER (DSL600ER)

The Aztech DSL600ER ADSL2/2+ Ready 4 Port Ethernet Combo Routers uses Texas Instruments AR7 Chipset solution that fully complies to ANSI T1.413 Issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) ADSL standard. Aztech DSL600ER also provides future proof functionality with higher data transmission rates with ADSL2, ADSL2+, Extended Reach-ADSL support.

Targeted at the residential and SOHO users, it is the ideal solution to provide a 4 in 1 device for both high speed broadband connectivity via a combined ADSL2/2+ ready Modem support, Routing functionality for multi-user sharing, 4 port AutoMDI/MDIx 10/100 Switch and true Firewall capability functionality.

Security is provided via a double Stateful Packet Inspection and NAT based Firewall. VPN Passthrough and DMZ support provide additional security support for telecommuters as well as allow flexibility while maintaining security against malicious hackers.

PRODUCT SPECIFICATIONS

ADSL/ATM Support

ANSI T1.413 issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) compliant ADSL2, ADSL2+, RE-ADSL Ready Rate Adaptive modem at 32 Kbps steps Dynamic Adaptive Equalisation to improve Carrier's service area Bridge Tap Mitigation support ATM Layer with Traffic shaping QoS Support (UBR, CBR, VBR-rt, VBR-nrt) AAL ATM Attributes - AAL5 Multiple PVC up to 8 support Spectral compatibility with POTS F5 OAM Loopback/Send and Receive

Encapsulation Support

RFC2684 Bridge and Routed LLC and VC Mux support RFC2364 PPPoA Client support RFC2516 PPPoE Client support RFC2225/RFC1577 Classical IP Support Transparent Bridge Support PAP/CHAP/MS-CHAP for Password Authentication Support

Network Support

Static IP, Dynamic RIP routing support IP/TCP/UDP/ICMP/ARP/RARP Application Support Network Address Translation (NAT) Port Mapping/Forwarding Easy setup of Port Forwarding rules for popular Games/Application NAT Application Level Gateway for popular applications DHCP Server/Relay/client DNS Relay Agent DMZ support Single Session IP Sec and PPTP/L2TP VPN pass through support PPP Always on with configurable timeout PPP Dial on Demand

Management Support

Web Based HTTP management GUI TFTP/FTP Support for Firmware Upgrade Web Based Firmware Upgrade (Local) Soft Factory Reset Button via Web GUI Telnet/CLI (Read Only) Syslog Support Firmware upgrade-able for future feature enhancement

Security Support

NAT for basic Firewall support Packet Filtering Firewall Support Stateful Packet Inspection Support Protection against Denial of Service attacks Password Authentication to Modem

Hardware

Texas Instrument TNETD7300 Single Chip Network Processor/AFE/Line Driver Chipset Marvell 88E6060-RCJ 5+1 Port 10/100 MAC/PHY Switch (Support Auto MDI/MDIx) 2 MB Flash ROM 8 MB SDRAM Dying Gasp Support ITU K.21 Support

Platform support

OS Independent for Ethernet

Power Requirements

Input Voltage : 9V DC +/- 10% Input Current : 1.0A

LED Indicators

1 x Internet (Green) LED 1 x Power (Green and Red) LED 1 x DSL (Green, Red and Amber) Link Status LED 4 x Ethernet Link/Activity Status (Green) LED

External Connectors

1 x RJ-11 Telephone socket for ADSL line 4 x RJ45 for 10/100Base-T Ethernet (AutoMDI/MDIx 1 x DC Jack for Power Input 1 x Factory Default Reset Button 1 x On/Off Power Switch

Measurements

Dimension : 176.5 (L) x 118.9 (W) x 37.9 (H) mm Weight : Approx. 350 g