Home mail to us Follow Us on Twitter! Follow Us on Facebook!
 
Home
Investor Relations
Newsroom
Awards
Careers
LED Lighting
ODM
Contract Manufacturing
Retail Brand
Contact Us
Headquarters:
31 Ubi Road 1
#09-01 Aztech Building
Singapore 408694
Tel: (65) 6594-2288
Fax: (65) 6749-1198
  ADSL - DSL5001EN Full Range of OEM Products  

Aztech DSL5001EN - ADSL2+ 150Mbps Wireless-N
1-Port Modem Router

The Aztech DSL5001EN ADSL2+ 150Mbps Wireless-N 1-Port Modem Router uses a complete Ralink chipset solution that fully complies with ADSL2/ADSL2+ standard.

The Aztech DSL5001EN supports 1T1R with PHY rate at 150Mbps.

Targeted at the residential and SOHO users that desires high quality triple play services. It is the ideal solution to provide a 6 in 1 device for both Wired and Wireless connectivity via a ADSL2+ built in modem, routing functionality for multi-user sharing, double-layer NAT/SPI firewall, One 10/100 Ethernet port (AutoMDI/MDIx) for video application QoS, high speed IEEE802.11b/g/n Wireless LAN Access point.

Aztech DSL5001EN is TR-069 compliant. TR-069 is a DSL forum technical specification report that defines the remote control/configuration of CPE from ACS (Auto Configuration Server), TR-069 is also well-known as "CPE WAN Management Protocol". The benefits of TR-069 include, remote management, auto-configuration, dynamic service activation, as well as saving cost on customer support and logistics.

Security is provided via a double Stateful Packet Inspection and NAT based firewall. Hardware accelerated AES/WEP/WPA/WPA2 based encryption/MAC Address Filtering for Wireless links. Multiple session VPN Pass-through and DMZ support provide additional security support for telecommuters as well as allow flexibility while maintaining security against malicious hackers. Choices of Dynamic DNS server give users the flexibility of hosting a web or an FTP server with various domain names.

With Universal Plug and Play support, home networking becomes a breeze for everyone in the family. Multi Port Range/Popular Application Forwarding makes it even easier to select which application you want your network to allow while ensuring your security at the same time.

PRODUCT SPECIFICATIONS

ADSL Support
  • ANSI T1.413 issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) compliant
  • G.992.3 (ADSL2), G.992.5 (ADSL2+), RE-ADSL2(Annex L)
  • Annex A, B, I, J and M
  • Support Erasure Decoding and Impulse Noise Monitoring
  • Embedded hardware ATM AAL-5 SAR supports UBR, UBR+, CBR and VBR and GFR traffics\
  • Configurable USB2.0 EHCI host or device controller
  • PCIe gen1 interface for 802.11a/b/g/n WLAN solution
  • Multiple PVC up to 8 support
  • Spectral compatibility with POTS
  • F4 & F5 OAM Loopback/Send and Receive
  • TR100 compliant
Encapsulation Support
  • RFC2684 Bridge and Routed LLC and VC Mux support
  • RFC2364 PPPoA Client support
  • RFC2516 PPPoE Client support
  • RFC2225/RFC1577 Classical IP Support
  • Transparent Bridge Support
  • PAP/CHAP/MS-CHAP for Password Authentication Support
Network Support
  • Static IP, Dynamic RIP v1/v2 routing support
  • IP/TCP/UDP/ICMP/ARP Application Support
  • Network Address Translation (NAT)
  • PVC to VLAN Mapping
  • Port Forwarding/Triggering
  • Easy setup of Port Forwarding rules for popular Games/Application
  • NAT Application Level Gateway for popular applications
  • DHCP Server/Relay/client
  • DNS Relay Agent
  • DMZ support
  • SIP ALG (Application Layer Gateway) support
  • Multiple Sessions IP Sec and PPTP/L2TP VPN pass through support
  • PPP Always on
  • PPP Dial on Demand with configurable timeout
  • Universal Plug and Play Support
  • DDNS (Dynamic DNS) Support
  • IGMP Proxy Support (IGMP v1 and v2)
  • SNTP Support
  • QoS Support (DSCP, TOS), including Diffserv, IEEE802.1p - Priority bit, IEEE802.1q - VLAN triggering
  • PPP/DHCP Auto Detection (Future release)
  • TR-069 Compliant
WLAN Support
  • 1x1 Wireless on Board
  • IEEE 802.11b/g and IEEE 802.11n compliant
  • 1T1R Mode with 150Mbps PHY rate for Both Transmit and Receiving
  • Transmit output power up to 20dBm (standard)
  • Legacy and High Throughput Modes
  • 20MHz/40MHz Bandwidth
  • Reverse Direction Grant Data Flow and Frame Aggregation
  • Frequency Band:
        2412 MHz - 2462 MHz (North America/FCC)
        2412 MHz - 2472 MHz (ETSI/Europe)
        2412 MHz - 2484 MHz (Japan)
        2457 MHz - 2472 MHz (France)
        2457 MHz - 2462 MHz (Spain)
  • Support Direct Sequence Spread Spectrum (DSSS) technology
  • Modulation: OFDM with BPSK, QPSK, 16QAM, 64QAM, DBPSK, DQPSK, CCK
  • Wireless Media Access Protocol- CSMA/CA with ACK
  • WEP 64/128, WPA, WPA2, TKIP, AES
  • QoS-WMM, WMM-PS
  • WPS support
  • Cisco CCX Support
  • Operating Range of >300 Meters (Open Air)
  • WDS Support (Wireless Distribution System)
  • MAC Address Filtering
  • Multiple BSSID Support
  • Low Power and Advanced Power Management
Management Support
  • Web Based HTTP management GUI
  • TFTP/FTP Support for Firmware Upgrade
  • Web Based Firmware Upgrade (Local)
  • Soft Factory Reset Button via Web GUI
  • Diagnostic Test (DSL, OAM (ADSL), Network (ADSL), Ping Test)
  • TR068 - WAN Access
  • Telnet with CLI (Read and Write) configuration
  • Syslog Support
  • Firmware upgrade-able for future feature enhancement
  • Quick firmware upgrade button (population option)
  • TR-069 (include TR-098, TR-111)
  • SNMP v1 and v2
  • TR-143
  • SSH Support
Security Support
  • NAT for basic Firewall support
  • Packet Filtering Firewall Support
  • Stateful Packet Inspection Support
  • Protection against Denial of Service attacks
  • Password Authentication to Modem
  • URL filtering/ Parental Control (Option)
  • Real-Time Attack and Alert Logs (Option)
HARDWARE
  • Ralink TC3162UE Processor
  • Ralink TC3086 AFE
  • Ralink RT5390 (Wireless Mac/BBP)
  • Dying Gasp Support (Population Option)
  • WPS Support
  • WIFI Active/Enable Support
  • 4MB SPI flash (Option for 8MB and 16MB)
  • 16MB SDRAM (Option for 32MB)
  • ITU K.21 Support
PLATFORM SUPPORT
  • For Ethernet:OS Independent
POWER REQUIREMENTS
  • Input Voltage: 12V DC +/- 10%
  • Input Current: 1.0A
LED Indicators

LED indication

  • 1 x "Power" LED (Green and Red LED)
  • 1 x Ethernet Link Status (Green) LED
  • 1 x "Wireless" LAN Link/Activity Status (Green) LED
  • 1 x WPS Status (Green) LED
  • 1 x "DSL" Status (Green) LED
  • 1 x "Internet" Status (Green and Red) LEDv
External Connectors

External Connectors

  • 1 x RJ-11 Telephone socket for DSL line
  • 1 x RJ45 for 10/100Base-T Ethernet  (AutoMDI/MDIx)
  • 1 x DC Jack for Power Input
  • 1 x Factory Default Reset Button
  • 1 x WPS Push Button Switch
  • 1 x On/Off Push Button Switch
  • 1 x Wireless On/Off Switch
  • 1 x 180° Fixed 2.4Ghz 3 dBi Antenna
DIMENSION
  • Dimension: 156mm x 135mm x 34mm
  • Weight: Approx. 250 g
REGULATORY APPROVALS (PENDING)
  • US: FCC Part 15B, 15.247/68, UL 3rd Edition (option)
  • Asia Pacific/ Europe: EN300328, EN301489, IEC60950
ENVIRONMENTAL
TEMPERATURE
  Operating: 0°C to 40°C (32°F to 104°F)
Non-Operating: -25°C to 70 °C (-13°F to 158°F)
HUMIDITY
  Operating : 30% to 90% Relative Humidity (Non-Condensing)
Non-Operating : 30% to 95% Relative Humidity (Non-Condensing)
NOTE : Specifications subject to change without prior notice
DSL5001EN
 
back to top