Home mail to us
 
Home
Investor Relations
Newsroom
Awards
Careers
Electronics
ODM
Contract Manufacturing
Retail Brand
Contact Us
Headquarters:
31 Ubi Road 1,
Aztech Building,
Singapore 408694,
Tel: (65) 6594-2288
Fax: (65) 6749-1198

ADSL2/2+ 4 PORT ETHERNET ROUTER

The Aztech DSL308ER ADSL 4 Port Ethernet Router Modem uses Conexant Argon IV Chipset solution that fully complies to ANSI T1.413 Issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) ADSL standard. Aztech DSL308ER also provides higher data transmission rates with ADSL2, ADSL2+, Extended Reach-ADSL support. This next generation ADSL will be providing up to 12Mbps speed and additional 600 feet reach for ADSL2 and 20Mbps speed for distances up to 5,000 feet. ADSL2+ support will provide up to 27Mbps speed.

Targeted at the residential users, it is for both the single user with Bridge mode with host based PPPoE Client or for multi-users utilizing the DSL308ER inbuilt PPPoE/A, IP routing, NAT functionality to share the ADSL link.

It comes with Stateful Packet Inspection firewall and DMZ support for a full security options against malicious hackers. With Universal Plug and Play support, home networking becomes a breeze for everyone in the family. Multi Port Range/Popular Application Forwarding makes it even easier to select which application you want your network to allow while ensuring your security at the same time. The DSL308ER supports Hardware based VPN Server/client for IP Sec, PPTP, L2TP providing security for enabling SOHO/Branch Office applications via Future firmware upgrade.

With DSL Home support for auto-provisioning through TR-069 for WAN management and TR-064 for LAN management, the DSL308ER is an ideal platform for a scalable managed solution for Telco deployment of advance services.

PRODUCT SPECIFICATIONS

ADSL/ATM Support
ANSI T1.413 issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) compliant
ITU-T G.992.1 (G.dmt Annex B) Population Option
ADSL2, ADSL2+, RE-ADSL compliant

TR-067 Compliant

Rate Adaptive modem at 32 Kbps steps
ATM Layer with Traffic shaping QoS Support (UBR, CBR, VBR-rt, VBR-nrt)
AAL ATM Attributes - AAL5
Multiple PVC up to 8 support
Spectral compatibility with POTS
F5 OAM Loopback/Send and Receive
Encapsulation Support
RFC2684 Bridge and Routed LLC and VC Mux support
RFC2364 PPPoA Client support
RFC2516 PPPoE Client support
RFC2225/RFC1577 Classical IP Support
Transparent Bridge Support
PAP/CHAP for Password Authentication Support
Network Support
Static IP, Dynamic RIP routing support
IP/TCP/UDP/ICMP/ARP Application Support
Network Address Translation (NAT)
Easy Connect Support
Port Mapping/Forwarding
NAT Application Level Gateway for popular applications
DHCP Server/Relay/client
DNS Relay Agent
DMZ support
Hardware Based IP Sec and PPTP/L2TP VPN Client/Server Support
PPP Always on with configurable timeout
PPP Dial on Demand
Universal Plug and Play Support
Management Support
DSL Home Support with TR-069 and TR-064 Support
Web Based HTTP management GUI
TFTP Support for Firmware Upgrade
Web Based Firmware Upgrade (Local)
Soft Factory Reset Button via Web GUI
Diagnostic Test (DSL, OAM, Network, Ping Test)
Telnet/CLI (Read/Write)
Syslog Support
Firmware upgrade-able for future feature enhancement
Security Support
NAT for basic Firewall support
Packet Filtering Firewall Support
Stateful Packet Inspection Support
Protection against Denial of Service attacks
Password Authentication to Modem
HARDWARE
Conexant Argon 432 DA4-9431-PCA Network Processor Chipset
Conexant Argon 432 BAZ-388I-NCA Analog Front End/Line Driver Chipset
Admtek ADM6996 6 Port Auto MDI/MDI-X MAC/PHY
2 MB Flash ROM (Population Option : 4MB Flash ROM)
8 MB SDRAM (Population Option : 16MB SDRAM)
Dying Gasp Support
ITU K.21 Support
10KV Surge Protection Support (Population Option)
PLATFORM SUPPORT
For Ethernet
  OS Independent
POWER REQUIREMENTS
Input Voltage : 9V DC +/- 10%
Input Current : 1.0A
PHYSICAL SPECIFICATIONS
LED Indicators :
  1 x Internet LED
1 x Power LED
1 x DSL Link Status LED
4 x Ethernet Link/Activity Status LED
External Connectors :
  1 x RJ-11 Telephone socket for ADSL line
4 x RJ45 for 10/100Base-T Ethernet (AutoMDI/MDIx)
1 x DC Jack for Power Input
1 x Factory Default Reset Button
1 x On/Off Power Switch
Measurements :
  Dimension : 189 (L) x 124 (W) x 28 (H) mm
Weight : Approx. 250g
REGULATORY APPROVALS
US : FCC Part 15/68, UL 3rd Edition
Australia : Australia A-Tick, C-Tick, Telstra 1149
Asia Pacific /Europe : CE (EN55022:98/EN55024: 98), IEC 60950
ENVIRONMENTAL
TEMPERATURE
  Operating :
0o to 40 o Celsius
32 o to 104 o Fahrenheit
  Non-Operating :
-25 o to 70 o Celsius
-13 o to 158 o Fahrenheit
HUMIDITY
  Operating : 30% to 80% Relative Humidity (Non-Condensing)
Non-Operating : 30% to 95% Relative Humidity (Non-Condensing)
NOTE : Specifications are subject to change without prior notice.

 
 
back to top