Aztech ADSL Ethernet Bridge/Router (DSL 305E)

The Aztech DSL305E ADSL Ethernet Bridge/Router uses Conexant Rushmore solution that fully complies to ANSI T1.413 Issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) ADSL standard. It supports Full-Rate ADSL transmission at up to 8Mbps downstream and up to 960 Kbps upstream. Furthermore, it is interoperable with major DSLAMs and support standard 10/100Base-T Ethernet interface cards.

Aztech DSL305E comes with two versions; 1) ADSL Ethernet Bridge Modem with PPP Half Bridge Termination* 2) ADSL Ethernet Router with PPPoE/PPPoA Client on the CPE

*DSL305E sold in Singapore market is a ADSL Ethernet Bridge Modem with PPP Half Bridge termination.

PRODUCT SPECIFICATIONS

ADSL/ATM Support

ANSI T1.413 issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) compliant Using Discrete Multi-Tone (DMT) line encoding scheme Rate Adaptive modem at 32 Kbps steps ATM Layer with Traffic shaping (UBR/CBR) AAL ATM Attributes - AAL5 Multiple PVC up to 8 support Spectral compatibility with POTS DSL Forum AutoConfiguration TR-037 Upgrade-able F5 OAM Loopback/Send UNI 4.0 Support Dying Gasp Support (Population Option)

Encapsulation Support

RFC2364 PPPoA client support* RFC2516 PPPoE client support* RFC2684 Bridge/Routed Support* Transparent Bridge (IEEE 802.1d) PPP Half Bridge Support

Network Support

Static IP, Dynamic RIP1 and RIP2 routing support* IP/TCP/UDP/ICMP/ARP/RARP Application Support Network Address Translation (NAT)* Port Mapping/Forwarding* NAT Application Level Gateway for popular applications* DHCP Server/Relay/client DNS Relay Agent

Management Support

Local Web/FTP Upload of Firmware Remote Firmware Upload via FTP FTP Server/Client Support Web Management/HTTP Server for configuration assistance System Logging support Firmware upgrade-able for future feature enhancement

Security Support

PAP/CHAP for Password Authentication Support NAT for basic Firewall support* Password Authentication to Modem*

Chipset

Conexant CX82310 168Mhz ARM940T Microprocessor Realtek RTL8201 Ethernet 10/100 PHY 2 Mb TSOP48 Flash ROM 8 Mb SDRAM

Platform support

OS Independent

Power Requirements

Input Voltage : 12V DC +/- 10% Input Current : 1.0 A (Max)

Physical Specifications

1 x Power LED 1 x Ethernet Link Status/Activity LED 1 x DSL Link Status LED

External Connectors

1 x RJ-11 Telephone socket for ADSL line 1 x RJ45 for 10/100Base-T Ethernet (MDI-X) 1 x DC Power Connector 1 x On/Off Power Switch (Population Option) 1 x Factory Default Reset Button

Measurements

Dimension : 176.5 (L) x 118.9 (W) x 37.9 (H) mm Weight : 300 g

Temperature

Operating : 0 o to 40 o Celsius 32 o to 104 o Fahrenheit Non-Operating : -25 o to 70 o Celsius -13 o to 158 o Fahrenheit

Humidity

Operating : 30% to 80% Relative Humidity (Non-Condensing) Non-Operating : 10% to 95% Relative Humidity (Non-Condensing)

System Requirements

Pentium MMX 233MHz (or above) with Ethernet card