Home mail to us Follow Us on Twitter! Follow Us on Facebook!
Investor Relations
LED Lighting
Contract Manufacturing
Retail Brand
Contact Us
31 Ubi Road 1
#09-01 Aztech Building
Singapore 408694
Tel: (65) 6594-2288
Fax: (65) 6749-1198
  ADSL - DSL1000EW(L) Full Range of OEM Products  

4-Port ADSL2/2+ Wireless-G Modem Router

The Aztech DSL1000EW ADSL2+ Wireless LAN 802.11b/g 4 Port Managed Switch Router uses complete Broadcom solution with wireless on board design that fully complies with ADSL2/ADSL2+ standard.

Targeted at the residential and SOHO users that desires high quality triple play services, it is the ideal solution to provide a 6 in 1 device for both Wired and Wireless connectivity via a ADSL2+ built in modem, Routing functionality for multi-user sharing, double-layer NAT/SPI firewall, 4 port 10/100 AutoMDI/MDIx Managed Switch for video application QoS, high speed IEEE802.11b/g Wireless LAN Access point.

Aztech DSL1000EW(L) is TR-069 compliant. TR-069 is a DSL forum technical specification report that defines the remote control/configuration of CPE from ACS (Auto Configuration Server), TR-069 is also well-known as "CPE WAN Management Protocol". The benefits of TR-069 include, remote management, auto-configuration, dynamic service activation, as well as saving cost on customer support and logistics.

Security is provided via a double Stateful Packet Inspection and NAT based firewall. Hardware accelerated AES/WEP/WPA/WPA2 based encryption/MAC Address Filtering for Wireless links. Multiple session VPN Pass-through and DMZ support provide additional security support for telecommuters as well as allow flexibility while maintaining security against malicious hackers. Choices of Dynamic DNS server give users the flexibility of hosting a web or an FTP server with various domain names.

With Universal Plug and Play support, home networking becomes a breeze for everyone in the family. Multi Port Range/Popular Application Forwarding makes it even easier to select which application you want your network to allow while ensuring your security at the same time.


ADSL Support
ANSI T1.413 issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) compliant
bullet01 G.992.3 (ADSL2), G.992.5 (ADSL2+), RE-ADSL Ready
bullet01 ATM Layer with Traffic shaping QoS Support (UBR, CBR, VBR-rt, VBR-nrt)
bullet01 AAL ATM Attributes - AAL5
bullet01 Multiple PVC up to 8 support
bullet01 Spectral compatibility with POTS
bullet01 F4 & F5 OAM Loopback/Send and Receive
bullet01 Annex A, Annex B, Annex M Support
bullet01 TR048 and TR067 compliant
Encapsulation Support
RFC2684 Bridge and Routed LLC and VC Mux support
RFC2364 PPPoA Client support
RFC2516 PPPoE Client support
RFC2225/RFC1577 Classical IP Support
Transparent Bridge Support
bullet01 PAP/CHAP/MS-CHAP for Password Authentication Support
Network Support
SIP ALG (Application Layer Gateway) support
Static IP, Dynamic RIP v1/v2 routing support
IP/TCP/UDP/ICMP/ARP Application Support
Network Address Translation (NAT)
PVC to VLAN Mapping
Port Forwarding/Triggering
Easy setup of Port Forwarding rules for popular Games/Application
NAT Application Level Gateway for popular applications
DHCP Server/Relay/client
DNS Relay Agent
DMZ support
Multiple Sessions IP Sec and PPTP/L2TP VPN pass through support
PPP Always on
PPP Dial on Demand with configurable timeout
bullet01 Universal Plug and Play Support
bullet01 DDNS (Dynamic DNS) Support
bullet01 IGMP Proxy Support (IGMP v1 and v2)
bullet01 SNTP Support
bullet01 QoS Support (DSCP, TOS), including Diffserv, IEEE802.1p - Priority bit, IEEE802.1q - VLAN triggering
bullet01 PPP/DHCP Auto Detection (Future release)
bullet01 TR-069 Compliant
WLAN Support
Wireless on Motherboard (WOMBO)
IEEE 802.11, 802.11b and 802.11g compliant
Supports 802.11b, 802.11g simultaneously
Transmit output power up to 20dBm (standard)
Conforms to Wireless Ethernet Compatibility Alliance (WECA) Wireless Fidelity (Wi-Fi tm)
Support seamless WLAN roaming
Frequency Band:
- 2412 MHz - 2462 MHz (North America/FCC)
- 2412 MHz - 2472 MHz (ETSI/Europe)
- 2412 MHz - 2484 MHz (Japan)
- 2457 MHz - 2472 MHz (France)
- 2457 MHz - 2462 MHz (Spain)
Support Direct Sequence Spread Spectrum (DSSS) technology
Modulation: OFDM with BPSK, QPSK, 16QAM, 64QAM, DBPSK, DQPSK,
Wireless Media Access Protocol- CSMA/CA with ACK
64/128 WEP Encryption
WPA/WPA2 Support
bullet01 MAC filtering Support
bullet01 Dynamic Rate Scaling from 54, 48, 36, 24, 12, 11, 9, 6, 5.5, 2, 1 Mb/s
bullet01 Operating Range of >300 Meters (Open Air)
bullet01 WDS Support (Wireless Distribution System)
bullet01 Multiple SSID Support (2)
Management Support
Web Based HTTP management GUI
TFTP/FTP Support for Firmware Upgrade
Web Based Firmware Upgrade (Local)
Soft Factory Reset Button via Web GUI
Diagnostic Test (DSL, OAM (ADSL), Network (ADSL), Ping Test)
TR068 - WAN Access
Telnet with CLI (Read and Write) configuration
Syslog Support
bullet01 Firmware upgrade-able for future feature enhancement
bullet01 Quick firmware upgrade button (depopulation option)
bullet01 TR-069 Compliant
bullet01 SNMP v1 and v2
bullet01 SSH Support
Security Support
NAT for basic Firewall support
Packet Filtering Firewall Support
Stateful Packet Inspection Support
Protection against Denial of Service attacks
Password Authentication to Modem
bullet01 URL filtering/ Parental Control (Option)
bullet01 Real-Time Attack and Alert Logs (Option)
Broadcom BCM6333 (Processor), BCM 6301 (5V line driver)
Broadcom BCM5325E (5-Port Ethernet Managed Switch)
Broadcom BCM4312 (Wireless Mac/Baseband/Radio)
bullet01 Dying Gasp Support (Population Option)
bullet01 USB 1.1 Device Support (Population Option)
bullet01 WPS Suport (Population option)
bullet01 4MB SPI flash (Upgrade option for 2MB and 8MB)
bullet01 16MB SDRAM (Upgrade option for 8MB and 32MB)
bullet01 ITU K.21 Support
Platform support
For Ethernet
· OS Independent
Power Requirements
Input Voltage : 12V DC +/- 10%
Input Current : 0.8~1.0A
Physical Specifications
LED Indicators :
- 1 x “Power” LED (Green and Red LED)
- 4 x Ethernet Link Status (Green) LED
- 1 x “Wireless” LAN Link/Activity Status (Green) LED
- 1 x “DSL” Status (Green) LED
- 1 x “Internet” Status (Green and Red) LED
- 1 x “USB” Status (Green) LED at the back panel underneath the USB connector
External Connectors :
- 1 x RJ-11 Telephone socket for DSL line
- 1 x USB 1.1 Type B (Option)
- 4 x RJ45 for 10/100Base-T Ethernet (AutoMDI/MDIx)
- 1 x DC Jack for Power Input
- 1 x Factory Default Reset Button
- 1 x WPS Switch Button (Option)
- 1 x On/Off Push Button Switch
- 1 x 180° Rotate-able 2.4Ghz 3 dBi Antenna (fixed)
Measurements :
- Dimension : 156 (L) x 135 (W) x 34 (H) mm
- Weight : Approx. 250 g
Regulatory Approvals (Pending)
bullet01 US : FCC Part 15/68, UL 3rd Edition (Target : 20-Oct)
bullet01 Asia Pacific /Europe : CE, IEC 60950 (Target : 20-Oct)

Operating : 0°C to 40°C

Non-Operating : -25°C to 70°C


Operating : 10% to 85% Relative Humidity (Non-Condensing)

Non-Operating : 5% to 95% Relative Humidity (Non-Condensing)

NOTE : Specifications are subject to change without prior notice.
back to top