Aztech Wall-Plugged 300Mbps Dual Band Concurrent Wireless-N Repeater Built for the new generation of wireless speeds and to extend coverage in hard-to-reach areas, the n.. Product #: WL580E

WL580E

Aztech Wall-Plugged 300Mbps Dual Band Concurrent Wireless-N Repeater

Built for the new generation of wireless speeds and to extend coverage in hard-to-reach areas, the new Aztech WL580E lets you surf the internet or share data quickly and reliably, at speeds of up to 300Mbps via Wireless.

Key Features:

  • Wireless-N data transfer rate up to 300Mbps
  • Wall-plugged directly to any power socket
  • Enable wired network to be WIFI ready
  • Smart MIMO Technology
  • Wi-Fi Protected Setup (WPS)
  • Connects to multiple networking devices

SHOP NOW:

In-stores Availability:




 

 

 

WL580E

 

WL580E

 

 

Aztech WL580E is a Wall Plugged 300Mbps Dual Band Concurrent Wireless-N Range Extender, which supports wireless 802.11a/b/g/n, and one 10/100Base-T Ethernet port. The extender is equipped with 1 x 10/100M Auto MDI/MDIx LAN port. It can also be used to configure the extender via its web-based GUI, or upgrade the firmware.

The device is designed with MIMO technology, which successfully reduces 'blind spots', and extends network coverage within a home or in the building. WL580E features with 64/128-bit WEP encryption and WIFI Protected Access (WPA), WPA2 to ensure the network security and prevent unauthorized access to you network.

The device is easy to setup. It is portable with no need of any external power adapter. It comes with the embedded power supply and power plug, so that users can just plug the device into a power socket.

 

Warranty Information
* 2 years

Hardware Key Chipset

  • Mediatek MT7620A Network Processor + 2.4 GHz Wireless chip 
  • Mediatek RT5592EP 5GHz RF chip 

Hardware Memory

  • Mediatek MT7620A Network Processor + 2.4 GHz Wireless chip 
  • Mediatek RT5592EP 5GHz RF chip 

Platform Support

  • OS Independent with TCP/IP protocol installed

Power Requirements

  • Supply voltage range : 100VAC – 240VAC (50/60 Hz)
  • Power Consumption : Less than 4W
  • Max Current : 0.12A

External Connectors

  • 1 x RJ45 (Fast Ethernet)
  • 1 x Factory Default Reset (Button)
  • 1 x WPS (Button)
  • 4 x Antennas (Internal embedded)

Measurements

  • 105(L) x 58 (W) x 42 (H) mm

Weight

  • 160g

Regulatory Approvals

  • USA : FCC
  • Asia Pacic/ Europe : CE, CB

Temperature

  • Operating: 0° to 40° Celsius (32° to 104° Fahrenheit)
  • Non-operating: 25° to 70° Celsius (-13° to 158° Fahrenheit)

Humidity

  • Operating: 30% to 90% Relative Humidity (Non-Condensing)
  • Non-operating: 30% to 95% Relative Humidity (Non-Condensing )
FirmwareDocumentations
Notes:

1. Please DO NOT upgrade your device over wireless connection.

2. If the unit is working properly with the existing firmware, do not upgrade.

3. Firmware release depends from country to country, download the firmware only if you're living in the country/region.

Item

1

2

Release Date

07-Dec-2017

07-Dec-2017

 

 

Certifications

Item

1

Release Date

07-May-2014