Aztech Wall-Plugged 300Mbps Wi-Fi Repeater Ergonomically designed with built-in power adapter, the innovative Aztech WL559E is a one-stop solut.. Product #: WL559E

WL559E

Aztech Wall-Plugged 300Mbps Wi-Fi Repeater

Ergonomically designed with built-in power adapter, the innovative Aztech WL559E is a one-stop solution for anyone who experiences poor wireless connection within his/her home or office, it is capable of extending wireless signal to areas with "blind spots".
  • Wireless-N data transfer rate up to 300Mbps
  • Wall-plugged directly to any power socket
  • Enable wired network to be WIFI ready
  • Smart MIMO Technology
  • Wi-Fi Protected Setup (WPS)
  • Connects to multiple networking devices

Where to buy:



Wi-Fi Repeater in Any Wall Outlet at Home or Office

Aztech WL559E is the latest Wi-Fi repeater model that follows WL556E, the first Wi-Fi repeater designed with an in-built power adapter. Unlike Wi-Fi repeaters that require an external power supply adapter, the innovative wall-plugged design empowers users to plug it directly into any available power outlet.


Robust 300Mbps Wireless-N Speed

300Mbps Wireless-N speed ensures faster wireless connection between devices. MIMO technology provides better overall coverage against weak Wi-Fi or Wi-Fi dead spots and enables users to stream multiple HD content wirelessly from Internet-enabled TVs, game consoles and media players without lag.


Intelligent LED Indicators

Received Signal Strength Indicators (RSSI) are LED indicators that intelligently determine the wireless signal strength received from the router. By reading the number of illuminated LED indicators, users can assess if the area that Aztech WL559E is plugged into is the recommended location for best Wi-Fi coverage. 


Fuss-free Set-up with WPS

Aztech WL886RT4 supports Wi-Fi Protected Setup (WPS) that allows users to connect to their network simply by pressing the WPS button located at the bottom of the product.


 

Warranty Information
* 2 years

 WL559E

 

WL556E


Protocol/Standards

  • Wireless IEEE802.11b/g/n  
  • Ethernet IEEE 802.3 10/100, IEEE802.3u, IEEE802.3ab 

Network Support

  • OFDM 1024
  • OFDM 256
  • OFDM 64
  • OFDM 16
  • OFDM 8 QAM
  • QPSK
  • BPSK
  • ROBO
  • IEEE802.11n: BPSK, QPSK, QAM-16, QAM-64
  • IEEE802.11g: BPSK, QPSK, QAM-16, QAM-64
  • IEEE802.11b: CCK, QPSK, BPSK

Wireless Frequency Band

  • Europe (ETSI): 2.412GHz ~ 2.742GHz (CH1 ~ CH13)

Security Support

  • Wireless: 64/128-bit WEP, WPA, WPA2

Hardware

  • Key Chipset: Ralink RT3352 Network Processor + WLAN Controller
  • SPI FlashRom: 4M Byte (Default)
  • DDR2 DRAM: 64M Byte

Platform Support

  • OS Independent with TCP/IP protocol installed

Power Requirements

  • Supply voltage range: 100VAC – 240VAC (50/60 Hz)
  • Power Consumption : Less than 4W
  • Max Current : 0.12A

External Connectors

  • 1 x RJ45 for 10/100Base-T LAN
  • 1 x Factory Default Reset Button
  • 1 x WPS button
  • 2 x Internal antennas

Dimension

  • 105(L) x 58 (W) x 42 (H) mm

Weight

  • 160g

Temperature

  • Operating : 0° to 40° Celsius(32° to 104° Fahrenheit)
  • Non-Operating :-25° to 70° Celsius(-13° to 158° Fahrenheit)

Humidity

  • Operating : 30% to 90% Relative Humidity (Non-Condensing)
  • Non-Operating : 30% to 95% Relative Humidity (Non-Condensing)
FirmwareDocumentationsFAQ
Notes:

1. Please DO NOT upgrade your device over wireless connection.

2. If the unit is working properly with the existing firmware, do not upgrade.

3. Firmware release depends from country to country, download the firmware only if you're living in the country/region.

Item

1

Release Date

26-Nov-2012